 Made in USA |
Commercial Parts Cleaning Solutions:
|
|
 |
SJ-2 Standard Parts Washers The SJ-2 series of front load parts washers provides a fast
economical cleaning solution for heavy duty, large parts cleaning.
With a work load of 500 lbs. and a pump output of 55 psi these heavy-duty
performers are among the best on the market. There's one to fit
your needs as well as your budget. |
Aqueous
A steel mill had been cleaning 42 inch roller bearings by boiling them in fuel oil for 6-8 hours in a 300 gallon vat. This was followed by manually scraping and brushing to remove the high temperature grease used in the bearing. They installed a spray washer (80 gpm, 75 psi, 160 F) as an alternative. The spray washer cleans the bearing in 15 minutes and gets it cleaner than the old method. The cost of the spray washer was returned to the company in 6 months in labor savings alone. As a result of installing the new washer they are cleaning the bearings more often (prolonging bearing life), and have eliminated a significant safety hazard.
|
 |
SJ-3 Truck Parts Washers The SJ-3 series of front load parts washers provides a fast
economical cleaning solution for heavy duty, large parts cleaning.
With a work load of 1500 lbs. and a pump output of 65 psi these
heavy-duty performers are among the best on the market. There's
one to fit your needs as well as your budget. |
|
 |
SJ-4 Jumbo Parts Washers The SJ-4 series of front load parts washers provides a fast
economical cleaning solution for heavy duty, large parts cleaning.
With a work load of 2000 lbs. and a pump output of 75 psi these
heavy-duty performers are among the best on the market. There's
one to fit your needs as well as your budget. |
|